Conductive

Developed with a next generation conductive sole unit which is inherently conductive and conforms throughout wear. Disclaimer: This footwear is conductive and tested in accordance with the test method as set out within EN ISO 20344:2011, 5.10. It provides no protection against electrical current and must not be worn in areas with charged electrical equipment or open circuits.

These products are used by end users in the following sectors: Nuclear, Aerospace, Defence, Advanced Manufacturing, Chemical, Petrochemical Oil and Gas.

Dielectric

Styles marked with this feature key are certified against international dielectric standards EN 50321-1:2018 Class 0 and ASTM F1117-03.

Electrical Hazard

Electrical Hazard footwear is tested in accordance with the test method ASTM F2412-18.

Protection deteriorates rapidly in damp and wet environments and with wear.

EH footwear is intended as secondary source protection equipment.

ESD

ESD has the same benefit as Anti-Static, however it’s resistance range is much lower. They have an electrical resistance between 0.1 and just 35 megaohm (MΩ), measured according to EN 20344:2011.

For this reason, all ESD compliant footwear is anti-static, however not all anti-static footwear is ESD compliant.

Rock Fall certify our ESD footwear to the latest available standard EN 61340-5-1:2016, and work to a maximum resistance range of 35 megaohm (M).

HI Resistant Outsole to 150°C

Boots that feature this symbol are all Heat Insulation Certified (HIC). This means they can withstand temperatures up to 150°C

Class 3 Chainsaw Protection

This key is featured on all products that are certified to BS EN 17249:2013, to the class 3 standard.

BS EN 17249:2013 is the standard for safety footwear with resistance to chain saw cutting.

Enhanced Chemical Resistance

Products labelled with this key are certified for chemical resistance in accordance with EN 13832-2:2018.

Foundry Boot Certified

This key is featured on all products that are certified to EN ISO 20349:2010, to the Fe clause.

These products meet all the applicable standards for EN ISO 20345:2011 and in some cases are also certified to ASTM Electrical Hazard standards

Jet Wash Protection

Styles featuring this key have a protective guard rated to 800bar (or 11'600 PSI)

Metatarsal Protection

An internal fitting in a selection of our footwear that provides further protection to your feet. Falling objects are a health and safety risk in many working environments, and this extra protection could be vital.

Welding Boot Certified

This key is featured on all products that are certified to EN ISO 20349:2010, to the Wg clause.

These products meet all the applicable standards for EN ISO 20345:2011

Climbing Irons Compatible

This is key is featured on all products that have been tested for use with most commonly specified and used Climbing Irons.

Washable

This key is featured on all products which are machine washable based on their materials and construction methods.

Whilst it is possible to force dry them Rock Fall will always recommend that footwear should be left to dry naturally.

Flame Resistant Fastening

This key is featured on all products that are constructed using flame resistant fastening methods.

It's often used on styles that are certified to EN ISO 20349:2010, the standard for footwear protecting against risks in foundries and welding.

We use these materials to build quick release mechanisms due to the environments they are worn in and the risks involved.

Flame Resistant Leather

This key is featured on all products that are constructed using flame resistant leather.

It’s often used on styles that are certified to EN ISO 20349:2010, the standard for footwear protecting against risks in foundries and welding.

We use these materials to build quick release mechanisms due to the environments they are worn in and the risks involved.

Flame Resistant Stitching

This key is featured on all products that are constructed using flame resistant stitching.

It’s often used on styles that are certified to EN ISO 20349:2010, the standard for footwear protecting against risks in foundries and welding.

We use these materials to build quick release mechanisms due to the environments they are worn in and the risks involved.

Vegan Friendly

This key is featured on all products that are constructed using fully man made materials making them suitable for use by individuals that live the vegan lifestyle.

Production lines are cleared down to ensure that no animal products can cross contaminate during the manufacturing process.

The modern textiles also have fantastic environmental properties.

Wide Fitting

Looking for safety footwear that offers a wider fit? Styles marked with this key are wider and offer more room in the toecap area.

You can find our shoe lengths on our size guide too.

Women’s Fit

This key is featured on all of our women’s styles that are constructed using women’s lasts. They are designed to accommodate the difference in women’s foot shape, this includes the heel to forefoot ratio as women have a narrower heel in relation to their forefoot.

A gender specific last improves the fit, comfort and durability of the footwear in the Rock Fall Womens Range.