Conductive

Developed with a next generation conductive sole unit which is inherently conductive and conforms throughout wear. Disclaimer: This footwear is conductive and tested in accordance with the test method as set out within EN ISO 20344:2011, 5.10. It provides no protection against electrical current and must not be worn in areas with charged electrical equipment or open circuits.

These products are used by end users in the following sectors: Nuclear, Aerospace, Defence, Advanced Manufacturing, Chemical, Petrochemical Oil and Gas.

Dielectric

Styles marked with this feature key are certified against international dielectric standards EN 50321-1:2018 Class 0 and ASTM F1117-03.

Electrical Hazard

Electrical Hazard footwear is tested in accordance with the test method ASTM F2412-18.

Protection deteriorates rapidly in damp and wet environments and with wear.

EH footwear is intended as secondary source protection equipment.

ESD

ESD has the same benefit as Anti-Static, however it’s resistance range is much lower. They have an electrical resistance between 0.1 and just 35 megaohm (MΩ), measured according to EN 20344:2011.

For this reason, all ESD compliant footwear is anti-static, however not all anti-static footwear is ESD compliant.

Rock Fall certify our ESD footwear to the latest available standard EN 61340-5-1:2016, and work to a maximum resistance range of 35 megaohm (M).

SRC Slip Rated

This key is featured on all products that are certified to SRC slip resistance rated in accordance with EN ISO 20345:2011.

The SRA test method is a ceramic tile wetted with dilute soap solution
The SRB test method is smooth steel with glycerol on the surface

Sole units which pass both test methods are certified to SRC.

Cold Insulation

Footwear featuring our enhanced cold insulation system is ideal for those working in challenging outdoor conditions.

A layer of insulating lining ensures cold protection and moisture absorption.

Heat Resistant Outsole to 300°C

This key is featured on all products that are manufactured with Solid Nitrile Rubber, PU Rubber or Dual Density Rubber sole units and certified against the HRO clause of EN ISO 20345:2011. 

The HRO marking means that the sole unit has been tested for Heat Resistance on contact up to 300°C.

HI Resistant Outsole to 150°C

Boots that feature this symbol are all Heat Insulation Certified (HIC). This means they can withstand temperatures up to 150°C

Class 3 Chainsaw Protection

This key is featured on all products that are certified to BS EN 17249:2013, to the class 3 standard.

BS EN 17249:2013 is the standard for safety footwear with resistance to chain saw cutting.

Enhanced Chemical Resistance

Products labelled with this key are certified for chemical resistance in accordance with EN 13832-2:2018.

Foundry Boot Certified

This key is featured on all products that are certified to EN ISO 20349:2010, to the Fe clause.

These products meet all the applicable standards for EN ISO 20345:2011 and in some cases are also certified to ASTM Electrical Hazard standards

Jet Wash Protection

Styles featuring this key have a protective guard rated to 800bar (or 11'600 PSI)

Metatarsal Protection

An internal fitting in a selection of our footwear that provides further protection to your feet. Falling objects are a health and safety risk in many working environments, and this extra protection could be vital.

Waterproof Membrane

Our range of hiking and safety footwear often feature an Activ-Tex® waterproof membrane for increased protection from water. If that’s what you’re looking for, look out for this symbol.

Welding Boot Certified

This key is featured on all products that are certified to EN ISO 20349:2010, to the Wg clause.

These products meet all the applicable standards for EN ISO 20345:2011

100% Non-Metallic Construction

This key is featured on all products that are manufactured utilising 100% non-metallic components. These include:

Fibreglass toecaps
Composite midsoles
Eyelets made of plastic, nylon or another fabric material

Climbing Irons Compatible

This is key is featured on all products that have been tested for use with most commonly specified and used Climbing Irons.

Internal Digging Plate

This key is featured on all products that are constructed using a sturdy internal digging plate. 

The IMPACT SHIELD™ Internal Digging Plate is integrated within the sole unit underneath the protective midsole to create a reinforced structure.

This provides ultimate underfoot stability on uneven terrain and reduces the force into the wearer's foot from spade and shovel work.

Ladder Grip

Washable

This key is featured on all products which are machine washable based on their materials and construction methods.

Whilst it is possible to force dry them Rock Fall will always recommend that footwear should be left to dry naturally.

Zip Fastening

This key is featured on all products that are manufactured utilising a sturdy YKK no. 8 side zip.

The no.8 zip is commonly used on heavy duty luggage items.

Styles with side zips are designed with water resistant gussets and in most cases have a waterproof membrane to ensure the boot is fully waterproof to the top of the upper.

Flame Resistant Fastening

This key is featured on all products that are constructed using flame resistant fastening methods.

It's often used on styles that are certified to EN ISO 20349:2010, the standard for footwear protecting against risks in foundries and welding.

We use these materials to build quick release mechanisms due to the environments they are worn in and the risks involved.

Flame Resistant Leather

This key is featured on all products that are constructed using flame resistant leather.

It’s often used on styles that are certified to EN ISO 20349:2010, the standard for footwear protecting against risks in foundries and welding.

We use these materials to build quick release mechanisms due to the environments they are worn in and the risks involved.

Flame Resistant Stitching

This key is featured on all products that are constructed using flame resistant stitching.

It’s often used on styles that are certified to EN ISO 20349:2010, the standard for footwear protecting against risks in foundries and welding.

We use these materials to build quick release mechanisms due to the environments they are worn in and the risks involved.

Sustainable

We're determined to be the most sustainable safety footwear brand in the world by 2022. Styles marked with this key have been designed to be sustainable at their core. More at rockfall.com/sustainability

Vegan Friendly

This key is featured on all products that are constructed using fully man made materials making them suitable for use by individuals that live the vegan lifestyle.

Production lines are cleared down to ensure that no animal products can cross contaminate during the manufacturing process.

The modern textiles also have fantastic environmental properties.

Arc Materials

This boot has been independently tested in accordance to the IEC 61482-1-1:2019 arc test methods. The results achieved are not an official rating or standard and the conclusions are not covered by the ENAC accreditation scope. The project ATPV rating for the material is 126 cal/cm² and Project rating for whole footwear was No Burns observed at 109.4 Cal/cm². Laces to the same specification from the manufacturer should be used as replacements.

Large Sizes Available 14+

Our footwear caters for people of all foot sizes, if you see this symbol, then we stock this shoe, or boot, in sizes up to 14.

Small Sizes Available 2+

We recognise the wide variety of industries that require specialist footwear, so we have a large proportion of our unisex footwear available from a size 3.

Look out for the Women's Fit feature key for styles made on a women’s last.

Wide Fitting

Looking for safety footwear that offers a wider fit? Styles marked with this key are wider and offer more room in the toecap area.

You can find our shoe lengths on our size guide too.

Women’s Fit

This key is featured on all of our women’s styles that are constructed using women’s lasts. They are designed to accommodate the difference in women’s foot shape, this includes the heel to forefoot ratio as women have a narrower heel in relation to their forefoot.

A gender specific last improves the fit, comfort and durability of the footwear in the Rock Fall Womens Range.